New releasePortable AMPs

YBA's VIBE P1 puts a discrete R2R DAC in a $599 battery-powered portable

The French brand's portable uses a 126-resistor ladder developed with Shanling, rated at 1,080 mW balanced into 32 ohms on battery, with published output impedance and no Bluetooth.

YBA's VIBE P1 puts a discrete R2R DAC in a $599 battery-powered portable
YBA's VIBE P1 puts a discrete R2R DAC in a $599 battery-powered portable · Image: YBA

YBA has launched the VIBE P1, a portable DAC and headphone amplifier at $599 / €649, rolling out internationally from September 2026. Its converter is a discrete resistor ladder of 126 thin-film resistors in a 19+5 segmented arrangement, developed with Shanling, with selectable NOS and oversampling modes, followed by two ADA4610 and four BUF634A devices. Into 32 ohms it is rated at 278 mW single-ended and 1,080 mW balanced on battery, rising to 344 mW and 1.33 W on external power, with output impedance of 0.3 ohms and 0.7 ohms. The 2,750 mAh battery is quoted at 11 hours single-ended and 9.5 hours balanced, in a 120 g body with no Bluetooth.

Publishing output impedance alongside power is the useful part: 0.3 ohms single-ended is low enough to leave even a sensitive multi-driver in-ear alone. The external-power mode is an admission that the battery limits the supply rails, and the gap between the two sets of figures shows by how much. The NOS switch is the measurable curiosity, since a non-oversampling ladder lets images above the audio band through and rolls off the top octave, both of which a measurement shows at once.

All Portable AMPs launches

Back to all new releases.