New releaseTubes

Cayin's HA-1A MK3 is a single-ended Class A EL84 headphone amplifier at €1,298

The entry point to Cayin's HA tube series runs two 12AU7 and two EL84 valves in single-ended Class A, rated at up to 2.7 W per channel balanced, with impedance settings from 8 to 600 ohms.

Cayin's HA-1A MK3 is a single-ended Class A EL84 headphone amplifier at €1,298
Cayin's HA-1A MK3 is a single-ended Class A EL84 headphone amplifier at €1,298 · Image: Cayin

Cayin has launched the HA-1A MK3, on sale in China from 9 September 2026 and in Germany from 14 September at €1,298, with US retail listings at $999. It uses two JJ 12AU7/ECC82 valves in the voltage stage and two Electro-Harmonix EL84EH/6BQ5 in a single-ended Class A output stage, with low (8-150 ohm) and high (151-600 ohm) impedance settings. Output is quoted at up to 2.7 W per channel from the 4-pin XLR socket in the international materials (2.8 W in Cayin's German listing) and 2.5 W from the 6.35 mm socket, with a 20 Hz-24 kHz (±3 dB) response, a 110 dB signal-to-noise ratio and 0.3% distortion at 1 kHz and 200 mW. It weighs 8.8 kg and doubles as a valve preamplifier.

A single-ended valve output stage reaches the headphone through a transformer, so the impedance selector and the output impedance it produces are the figures to look for: output impedance decides how much an amplifier reshapes a headphone's bass. The quoted 0.3% at 200 mW reflects a deliberate choice of topology rather than a shortfall, and a ±3 dB tolerance to 24 kHz is loose enough that the measured curve matters more than the headline figure.

All Tubes launches

Back to all new releases.